| |
|
|
 |
CIP Bearings
Suited for high loads, low speed applications.
Can run against hard or soft mating surfaces.
Homogeneous material throughout bearing.
Easily machined.
Resin bonded fabric with electrical insulation. |
| Maximum PV |
25,000 |
| Tensile strength (psi) |
10,000 |
| Compressive strength (psi) |
35,000 |
| Available Sizes |
1/2" ID - 5" ID STD.
Special diameters available to 54 inches |
|
|
|
 ManualHydroMarineTLM Standard BearingsMTLB Metric Bearings
OTW Standard WashersMTLW Metric Washers
|
| |
|
|
|
|
 |
| |
|
|
|
|
|
Rulon Bearings
Suited for low load, average speed applications.
Does not require lubrication.
Chemically inert.
Filled P.T.F.E. |
| Temperature - Operating |
-400 / + 550 |
| Maximum PV |
10,000 |
| Maximum V (SFM) |
400 |
| Shaft hardness - Min. |
Rc 35 |
| Shaft RMS |
8-24 |
| Shaft Material |
Steel |
| Maximum P (PSI) |
1,000 |
|
Pricing and availability (registered users only) |
Rulon BearingMetric Rulon |
| |
|
|
|
|
|
| |
|
|
|
|
 |
CJ Bearings & Thrust Washers
Long wearing, maintenance-free bearing suitable for high load/low speed applications.
Low coefficient of friction.
Chemical resistant. |
| Temperature - Operating |
-320 / + 350F |
| Maximum PV |
30,000 |
| Maximum V (SFM) |
150 |
| Shaft hardness - Min. |
Rc 50 |
| Shaft RMS |
8-16 |
| Shaft Material |
Steel |
| Maximum P (PSI) |
35,000 |
|
Pricing and availability (registered users only) |
| CJ Bearings |
|
|
| |
|
|
|
|
|
| |
|
|
|
|
 |
FCJ/Precision FCJ Bearings
Suited for combination motion-oscillatory, linear, and/or rotary applications.
Bearings can run against mild steel shafting.
Excellent general purpose bearing. |
| Temperature - Operating |
-320 / + 350F |
| Maximum PV |
35,000 |
| Maximum V (SFM) |
500 |
| Shaft hardness - Min. |
Rc 25 |
| Shaft RMS |
8-16 |
| Shaft Material |
Steel |
| Maximum P (PSI) |
20,000 |
|
Pricing and availability (registered users only) |
| FCJ Bearing Precision FCJ Bearing Metric FCJE Bearing |
| |
|
|
|
|
|
| |
|
|
|
|
 |
Fabricated Plane Bearings
(SAE 660)
Suited for high load applications. Must be lubricated.
Standard Bronze Bearings
83% Copper, 7% Tin, 7% Lead, 3% Zinc
Tensile Strength (psi) 44,000
Machined to customer's print/specs. |
|
|
|
For pricing and availability, please contact Welker direct 1-800-229-0890 |
Fabricated Plane Bearings Fabricated Plane Bearings (Metric) |
| |
|
|
|
|
|
| |
|
|
|
|
 |
Self Lube Clamp Pivot Bearing
Material: C86300 Bronze Alloy with Solid Lubricant Plugs
I.D. 12mm Tolerance H7
O.D. 18mm Tolerance p6
Length 19mm Tolerance -0.1, -0.3
Part Number: S01115012018019
Length 16mm Tolerance -0.1, -0.3
Part Number: S01115012018016 |
|
|
|
For pricing and availability, please contact Welker direct 1-800-229-0890 |
| Clamp Pivot |
|
|
|
|
